Summary
Overview
Work History
Education
Skills
Languages
Affiliations
Training
Personal Information
Instrumentation & Fire and Gas
Timeline
Generic
Mohammad Ahsan Ansari

Mohammad Ahsan Ansari

Hidd,Bahrain

Summary

Experienced professional in instrumentation and control systems, Planning, scheduling, and maintenance within CMMS, SAP, Maximo, and NSE working software. Demonstrates expertise in the installation, commissioning, and troubleshooting of Instrument devices including fire and gas detection systems. Proficient in E&I EX equipment installation and inspection according to IEC standards. Skilled in calibration and maintenance of a wide range of process control instruments & Fire and gas system such as transmitters, valves, and sensors Gas detector. Adept at executing maintenance work with respect to loop diagrams and cause & effect drawings. Committed to ensuring safety compliance in hazardous areas while enhancing operational efficiency.

Overview

16
16
years of professional experience

Work History

I&C Maintenance

Seapeak LNG
Hidd, Bahrain
06.2021 - 02.2025

Performing daily routine and corrective maintenance, as well as troubleshooting, for a variety of systems and equipment on both onshore and offshore platforms. Responsibilities included maintaining instruments and systems related to Fire and Gas, CCTV, telecommunications, analyzers (GC), and sampling units across multiple facilities. Key equipment managed includes:

  • APU (Air Purifying Unit)
  • Regasification Unit
  • FSU (Floating Storage Unit)
  • LNGC (Liquefied Natural Gas Carrier)
  • Marine Loading Arms
  • BOG (Boil-off Gas) Compressor Unit
  • Hypochlorite Systems
  • Seawater Pumps
  • Send-out Pumps

Instrument Supervisor

Teekay LNG
Hidd, Bahrain
02.2021 - 06.2021
  • Company Overview: Through Compsip Al AAli WLL (VINCI ENERGIES)


F&G Maintenance coordinator

ADNOC
Abudhabi, UAE
06.2020 - 02.2021
  • Company Overview: Through Solas marine Services

F&G supervisor

ADNOC Gas Processing
Ruwais, UAE
10.2013 - 04.2020
  • Company Overview: Through Zener Electrical and Electronics Services


F&G Commissioning Supervisor (F&G)

ADNOC Gas Processing
Ruwais, UAE
10.2012 - 07.2013
  • Company Overview: Through Control & Application Emirates (CAE)


Instrument Technician

Qatar Chemical
Mesaied, Qatar
03.2010 - 07.2012
  • Company Overview: Through Peregrine Projects and Solution


Instrument Technician

ELMATICS ENGG PVT LTD
04.2009 - 11.2009
  • Company Overview: India
  • India

Instrument Technician

BOC Gases
09.2008 - 03.2009
  • Company Overview: BOC India Limited
  • BOC India Limited

Education

Diploma - Instrumentation& Control

The oxford Polytechnic
Bangalore, Karnataka

S.S.C -

B.S.E.B
India

Bachelor of Technology - Electronics & Communication Engineering

RVD UNIVERSITY
India

Skills

    ❖ Planning, scheduling, maintenance data update and closing work orders in CMMS, SAP, Maximo, NSE

    ❖ Serving in the installation, pre-commissioning and commissioning of complex or critical system and assist with material and labour requirements for assigned jobs, prepare material requisitions for approval, plan work in accordance with instructions or work requirement-utilizing loop diagrams, Cause and Effects, Block diagrams, Wiring Diagrams, layout Drawings, P&IDs, schematics and manual as necessary, inter connection diagrams, Alarm and trip schedule, instrument data sheet Shutdown philosophy

    ❖ Prepare check sheet which involve inspection of instrument installation, create punch list of instrument not conforming installation based on the P&ID and specification

    ❖ E&I EX equipment Installation and Inspection accordance with IEC60079-14, IEC60079-17

    ❖ Performing ATEX Detailed, close, visual inspection

    ❖ EX equipment Detailed inspection against with Zone, gas group, temperature class, explosion protection

    EX d, Exe, EXi, EXn, EXm, Exo, EXq, IP Rating, Ingress Rating

    ❖ Inspection of hazardous area Zone0, Zone1, Zone2 and nonhazardous area

    ❖ Preparation of ITRs related documents (SLD, location drawing, hazardous area drawing, termination drawing, etc

    ❖ Responsible for witnessing and acceptance of loop checking and function testing of different system and sub-systems

    ❖ Experience in troubleshooting and maintenance of Instrumentation and fire and gas systems

    ❖ Hands on Experience in installation, commissioning, calibration, and maintenance of various process control instruments like control valve, Transmitters, Switches, flow meters, On/Off valves, self-control valves, Pneumatic and hydraulic instruments used in Well-head control panels

    ❖ Testing, maintenance and troubleshooting of fire & gas devices and fire suppression-systems

    ❖ Familiar with oil & gas plant hazards Emergency procedures and PTW system

    ❖ Up gradation of Yokogawa Prosafe-RS PLC, ESD system, F&G and DCS modification, IN GASCO Train 1&2 and Jetty Berth 1,2, & 3 (Contractor CEGELEC, ADYARD) and Sulphur Handling Terminal 2 (RSHT2) Honeywell PLC

    ❖ During loop check, check Instrument index, Datasheet, Flow rate range, Engineering, Unit, Alarm, ESD valve On-Line test, Sequence of Events, Service Description, Bad input/output, P&ID drawing, Location drawing

    ❖ Shutdown Activity Preparation, Isolation, De-isolation of Instrument



Languages

English
Fluent
Hindi
Fluent
Urdu
Fluent

Affiliations

  • Cricket
  • Footbal
  • Music

Training

❖ IECEx Certificate of Personnel Competence (CoPC), covering Ex 001, 003, 004, 006, 007, and 008

Certificate number (IECEx CP XRT24.0386)

❖ Fire Prevention, Fire Fighting and elementary first aid, H2S & BA Competency Training.

❖ PTW, ePTW, Work and height and CSE, Compressed gas cylinder handling.

❖ VESDA (Very Early Smoke Detection Apparatus)

❖ Competency Test of Fire & Gas Safety Instrumented System’s

❖ Training of Main lift and scissor lift operator.

❖ Defense and Desert driving Training from Numero Uno Abu Dhabi certificate No- 157148

  • Training of Main lift and scissor lift operator.

Personal Information

  • Passport Number: S3654438
  • Passport Expiry Date: 03/19/28
  • Date of birth: 08/02/87
  • Gender: Male
  • Nationality: Indian
  • Marital status: Married

Instrumentation & Fire and Gas

  • Conduct preventive and scheduled maintenance, routine checkups, and functional testing of instrument loops.
  • Maintain and commission field instruments, including calibration and servicing of pressure, temperature, flow, and level transmitters, as well as solenoid valves, thermocouples, and RTDs.
  • Manage daily maintenance of DCS field instruments, with hands-on experience on Rosemount, Foxboro, and Emerson electronic transmitters.
  • Calibrate and troubleshoot various transmitters and control valves, including Masonelion, Flowserve, and Fisher models, and check stroke configurations on motor-operated valves.
  • Troubleshoot, align limit switches, and overhaul SOVs (Tokiyo Kesio).
  • Set, calibrate, and maintain pressure, temperature, and level switches, vibration sensors, and speed sensors.
  • Engage in control panel termination, loop checks, functional checks, and pre-commissioning and commissioning activities.
  • Verify transmitter software configurations, check hardware addresses, and ensure alignment with instrument loop diagrams before client presentations.
  • Perform loop checks, instrument index validation, alarm settings, P&ID checks, and transmitter failsafe burnout tests.
  • Utilize HART Communicators (275, 375, 475) for loop checks and interlock testing, following instrument loop diagrams (ILD).
  • Repair, troubleshoot, and maintain electronic and pneumatic instruments for various parameters like temperature, flow, level, and pressure.
  • Operate and check DCS and PLC systems, including overrides, alarm inhibitions, and parameter checks in Yokogawa, Honeywell, and Allen-Bradley systems.
  • Perform functional and logic testing for Fire & Gas systems, motors, and related interlock systems.

Fire & Gas System Experience:

  • Maintain and troubleshoot Fire & Gas detection systems, including open path gas detectors, smoke, heat, flame, UV/IR detectors, and break glass units.
  • Test and maintain VESDA, INERGEN, and FM200 systems, as well as deluge systems integrated with PLC/DCS.
  • Troubleshoot and calibrate hydrocarbon, hydrogen, and other gas detectors in various areas, including power generators and compressors.
  • Install, service, and maintain fire alarm, fire detection, fire protection, and gas detection systems.
  • Maintain and troubleshoot fire water monitoring systems integrated with PLC/DCS, including calibrating pressure transmitters and switches.
  • Perform maintenance on fire detection and suppression systems, particularly for gas turbines, and ensure the proper functioning of suppression systems like INERGEN, FM200, and deluge systems.

Timeline

I&C Maintenance

Seapeak LNG
06.2021 - 02.2025

Instrument Supervisor

Teekay LNG
02.2021 - 06.2021

F&G Maintenance coordinator

ADNOC
06.2020 - 02.2021

F&G supervisor

ADNOC Gas Processing
10.2013 - 04.2020

F&G Commissioning Supervisor (F&G)

ADNOC Gas Processing
10.2012 - 07.2013

Instrument Technician

Qatar Chemical
03.2010 - 07.2012

Instrument Technician

ELMATICS ENGG PVT LTD
04.2009 - 11.2009

Instrument Technician

BOC Gases
09.2008 - 03.2009

Diploma - Instrumentation& Control

The oxford Polytechnic

S.S.C -

B.S.E.B

Bachelor of Technology - Electronics & Communication Engineering

RVD UNIVERSITY
Mohammad Ahsan Ansari